Powerflex Black Series

Rear Engine Mount Bush Insert PFF73-304BLK

This bush is an insert and to be used with the original rubber bush. It fits Type R and Si models only.

This bush only fits European Sport models. This is an insert and fits into the voids of the original bush, it does not replace the complete bush. PFF73-420 fits into the voids of the original bush,...

EXH030BLK is designed to replace the internal rubber bush that can so often become unattached from the bracket.

This bush measuers 64mm. For a 74mm diameter bush, use PFF76-423.

Fits models supplied from Toyota with a Limited Slip Differential (LSD) fitted from the factory. For non LSD models use PFF76-421.

Rear Inner Bar Link Bush PFR76-105BLK

Rear Inner Rear Lower Arm PFR88-604BLK

PFR76-305BLK fits Rev 1&2 models 1989 to 1992 and uses a M14 bolt. For Rev 3 models 1993 to 2000 use PFR76-305-12BLK which uses an M12 bolt.

For 35mm bush, use PFR42-611

PFR76-305-12BLK fits Rev 3 models 1993 to 2000 which uses an M12 bolt. For Rev 1&2 models 1989 to 1992, using an M14 bolt use bush PFR76-305BLK.

This bush is used on the rear lateral arm inner and outer positions. The outer shell is bonded to the polyurethane making this a one piece bush and sleeve.