Outback (2003 - 2009)

Made in our Purple 80A Durometer Polyurethane, it is supplied with a steel outer shell for stiff and durable longitudinal control of the rear axle under acceleration and braking, with an articulating design to retain the factory-specified geometry change...

This part replaces OE number: 20204AG010.

PFF69-505G is designed to replace the front lower control arm rear bush and is engineered to provide:- 1. revised front ANTI-LIFT geometry 2. on-car CASTER adjustment giving +/-0.33 degrees of adjustment 3. improved front traction and reduced understeer...

Please measure the diameter of the anti roll bar and order the correct size.

Please measure the diameter of the anti roll bar and order the correct size.

Please measure the diameter of the anti roll bar and order the correct size.

Front Arm Front Bush PFF69-501

Kit contains 2 camber bolts, tab washers and nuts. Camber adjusting bolt to replace the original 14mm bolt. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber...

Rear Lower Front Lateral Tie Bar PFR69-408

Rear Lower Rear Lateral Tie Bar Inner Bush PFR69-409

Rear Lower Rear Lateral Tie Bar Outer PFR69-410

Rear Upper Lateral Tie Bar Inner PFR69-411