i20 BC3 INC N (2018 ON)

To replace the small rubber bushes at the end of the gear linkages, these bushes are made from our Purple 80A Durometer polyurethane to give a stiff and precise gear-change. OEM Part Number: 43794 S0100

PFF26-225 Upper Engine Mount Insert is made in our Yellow 70A durometer material for increased mount longevity and performance. Designed to fill the voiding in the OE rubber mount, it smooths out gear changes by stiffening and supporting the often...

An easy-to-fit upgrade to limit movement within the upper gearbox mount, this Purple 80A Durometer insert simply fits into the voiding within the mount and is secured in place with an included steel plate. Reduced powertrain movement will result in...

Replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. Ideal when fitted alongside PFF26-120. OEM Part Number: 21950-CO000 OEM Part Number:...

PFF26-122-12P Lower Torque Mount - Fast Road/Track combines our stiffer Purple 80A and Black 95A materials, providing a 350% increase in stiffness over OE for even sharper response and durability for more extensively tuned vehicles or mild track use...

PFF26-122-12 Lower Torque Mount - Fast Road is an anodised CNC-Machined 6082 Aluminium mount pre-fitted with our Yellow 70A and Black 95A polyurethane bushes, for a true bolt-off, bolt-on replacement, with no pressing or assembly required. With its...

FRONT ANTI ROLL BAR BUSH 23.2MM PFF26-103-23.2 Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check...

FRONT ANTI ROLL BAR BUSH 22.5MM PFF26-103-22.5 Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check...

FRONT ANTI ROLL BAR BUSH 20MM PFF26-103-20 Made from our Black 95A Durometer Polyurethane, this bush will improve mid-corner stability and ensure that roll-angle is consistent and settled; and will far outlast the factory rubber bushes. Please check anti...

PFF26-120P replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. The Purple 80A material makes for a more spirited drive better suited to fast...

PFF26-120 replaces the original rubber bush for increased engine stability under acceleration and boosts the torque reaction of the mount for improved acceleration response. With virtually no increase in NVH, reduced wheel hop and a more direct...