Arosa (1997 - 2004)

Kit contains 2 x 12.9 Steel camber bolts, tab washers and nuts. Camber adjusting bolt to replace the original 12mm bolt. This fits 2 bolt hub to strut models only. Check bolt diameter. Size: 12mm

Front Wishbone Front Bush PFF85-401

Front Wishbone Rear Bush PFF85-402

Does not fit Lupo 1996-2006 1.2 3L TDi and 1.4 FSi models with chassis codes ANY, AYZ & ARR models. Measure bar where the bush sits as the diameter varies along the length of the anti roll bar.

Does not fit Lupo 1996-2006 1.2 3L TDi and 1.4 FSi models with chassis codes ANY, AYZ & ARR models. Measure bar where the bush sits as the diameter varies along the length of the anti roll bar.

Does not fit Lupo 1996-2006 1.2 3L TDi and 1.4 FSi models with chassis codes ANY, AYZ & ARR models. Measure bar where the bush sits as the diameter varies along the length of the anti roll bar.

Bushes fit eye bolt mounting either side of where it passes through the wishbone. PFF85-208-10 is suitable for links with a 10mm diameter shaft which uses an M8 nut to hold the bushes in position.

Fits both 20mm and 22mm diameter bars

Front Anti Roll Bar Eye Bolt Bush 18mm PFF85-209

Does not fit models with engine codes AMF 1.4 diesel engine or ANY & AYZ 3L TDI engines

PFR85-615 fits VW Polo 6N, Seat Cordoba and Ibiza 6K 1993-1999. It also fits VW Lupo (1999-2006) and Seat Arosa (1997-2004). It measure 58mm diameter.