A2 (1999 - 2005)

PFF85-602G offers additional +1 degree of caster and is a high-performance option to PFF85-602. PFF85-602G offers additional +1 degree of caster and is a high-performance option to PFF85-602. Aimed at offering greater precision with improved geometry for...

For a caster offset version of this bush please use PFF85-602GBLK.

Fits 2WD models only with a 69mm diameter bore rear beam. For vehicles with 72.5mm bore please use PFR85-415.

PFF85-620 is suitable for petrol engined road models. For diesel engine models use PFF85-620R. Fitting engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade, some additional vibration may be felt.

Please check anti-roll bar diameter before ordering.

PFF85-201G gives +/- 0.5 degrees of camber adjustment. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For a...

If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a...

The OE rubber steering rack mounting bush that secures the rack position is one of those that commonly softens causing vague steering often followed by a pulling feeling on the road, and a less than enjoyable driving experience...