997 GT2, GT3 & GT3RS

PF57-561K Bolt-On Jack Pad Adaptor Kit is a kit of four anodised CNC-machined 6082-grade aluminium Jack Pads with a 95A durometer anti-slip base that fit into the four underbody lifting points on most modern Porsche vehicles including the classic 911...

PFR57-531 fits 996 & 997 vehicles with the twin mounting bracket (OEM part number 99737503303) at the end of the gearbox, as fitted to all 3.6 & 3.8 Tiptronic models, Turbo models Manual & Tiptronic, GT2 & GT3. For vehicles with a single bush (OEM part...

On some early 997 models (pre 2006) there is no supporting lug on the upright to the outside faces of the outer bushes. For these models use 4 x PFR57-508 outer bush & 4 x PFR57-509 for the inner bush. For cars with lugs use 8 x PFR57-509.

Rear Link Arm Inner Bush PFR57-507

PFF57-801 allows the front camber angle to be adjusted on-car by +/- 0.75. For non-adjustable use PFF57-503.

Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-801. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C.

Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-802. - Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C.

PFF57-502G Front Track Control Arm Caster Offset Outer Bush uses our usual Purple 80A material combined with an offset bore sleeve to allow up to 0.4° of Caster increase from OE, allowing for steering pull correction or a more aggressive steering...

Supplied as an engine set of 6, our new PFR57-526K Engine Intake Sleeve Kit is made in our Dark Grey 80A polyurethane material for an OE aesthetic with increased durability and reliability over the equivalent rubber items which from what we have been...