964 (1989 - 1994)

PF57-561K Bolt-On Jack Pad Adaptor Kit is a kit of four anodised CNC-machined 6082-grade aluminium Jack Pads with a 95A durometer anti-slip base that fit into the four underbody lifting points on most modern Porsche vehicles including the classic 911...

This is an insert to fit into and fills the voids in the original rubber bush. For a replacement bush please use PFR57-124. This bush fits the following RWD vehicles: 964 C2 1992-1994 Triptronic - Transmission type A50.02/A50.03 993 C2 1994-1998...

This is an insert to fit into the original bush and fits the following RWD vehicles: 964 C2 1990-1994 Manual - Transmission type G50.03/G50.04/G50.05) 964 Turbo 1991-1992 Manual - Transmission type G50.52) 964 C2 1992-1994 Tiptronic - Transmission type...

This part includes an optional support washer with a built in insert to fit into the voided bush for quick and easy tuning of stiffness levels. This bush fits the following RWD vehicles: 964 C2 1990-1994 Manual - Transmission type G50.03/G50.04/G50...

This is a replacement bush for the original bush. For an insert only please use PFR57-127. This bush fits the following RWD vehicles: 964 C2 1992-1994 Triptronic - Transmission type A50.02/A50.03 993 C2 1994-1998 Manual - Transmission type G50.20/G51...

This is an insert to fit into and fill the voids in the original bush OE number: 99337521900 in bracket assembly OE number: 96437502301 found on AWD vehicles. For a replacement bush please use PFR57-122. This part fits the following vehicles: 993...

This part includes an optional support washer with a built in insert to fit into the voided bush for quick and easy tuning of stiffness levels. This part replaces the original bush OE number: 99337521900 in bracket assembly OE number: 96437502301 found...

This bush fits the following RWD vehicles: 964 C2 1990-1994 Manual - Transmission type G50.03 / G50.04 / G50.05 964 Turbo 1991-1992 Manual - Transmission type G50.52 964 C2 1992-1994 Tiptronic - Transmission type A50.02 / A50.0 993 C2 1994-1998 Manual -...

PFR57-106 has been designed to replace the rear trailing arm front bush where the arm locates onto the chassis. These bushes are no longer available from Porsche unless you buy the complete arm at a cost of over 1000.00. The RS model had a stiffer bush...

Front Anti Roll Bar Bush 27mm PFF57-601-27

Front Anti Roll Bar Bush 24mm PFF57-601-24

For the 993, it is only used on the RS Models.